voestalpine Bohler Welding URANOS 2000 SMC Mode D'emploi page 16

SYSTEM PRESENTATION
3. SYSTEM PRESENTATION
EN
3.1 Rear panel
3
3.2 Sockets panel
1
2
1
2 3
Power supply cable
1
Connects the system to the mains.
Off/On switch
2
Turns on electric power.
It has two positions, "O" off, and "I" on.
Rear gas connection
3
1
Process TIG: Torch connection
MIG/MAG process: Torch connection
Positive power socket (+)
2
Process MMA: Connection electrode torch
Process TIG: Connection earth cable
MIG/MAG process: Voltage change device connection
Negative power socket (-)
3
Process MMA: Connection earth cable
Process TIG: Voltage change device connection
MIG/MAG process: Connection earth cable
16