Parkside PDFP 500 C3 Traduction Des Instructions D'origine page 5

AIR PAINT SPRAY GUN
PDFP 500 C3
Introduction
Congratulations on the purchase of your new ap-
pliance . You have selected a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .
Intended use
This compressed air-powered appliance is designed
solely for the application/spraying of solvent-based
and water-soluble paints, glazes, foundation, clear
varnishes, vehicle paints, stains, wood preserva-
tives, pesticides, oils and disinfectants . The appli-
ance is not suitable for working with emulsions
or latex paints, lye, acidic coatings, granular and
gritty spray materials or spray- or drip-resistant
materials . Any other usage of or modification to the
appliance is deemed to be improper and carries
a significant risk of accidents . The manufacturer
accepts no responsibility for damage(s) resulting
from improper usage . This appliance is intended
for domestic use only .
Symbols on the compressed air tool:
Read the operating instructions
WARNING!
before use .
Always wear safety goggles .
Always wear a mask .
Always wear hearing protection .
Always wear protective gloves .
■ 2 │ GB │ IE │ NI
Features
Venting
Flow cup lid
Flow cup
Stroke limiter screw (paint flow-rate control)
Control for round/broad jet
Compressed-air connection
Airflow control
Trigger
Nozzle head
Needle
Spring
Brush
Filter
Screw thread (flow cup)
Package contents
1 air paint spray gun PDFP 500 C3
1 flow cup
1 flow cup lid
1 cleaning brush
1 filter
1 set of operating instructions
Technical details
Max . working pressure: 3 bar
Nozzle size:
Flow cup:
Recommended viscosity: 18–23 DIN / Sec .
Noise emission value:
Noise measurement value determined in accordance
with EN 14462 . The rated noise level at the working
location is typically as follows:
Sound pressure level:
Uncertainty:
Ø 1 .4 mm
approx . 500 ml
L = 72 .1 dB(A)
pA
K = 2 .5 dB
pA
PDFP 500 C3