Alva NEO PRO Mode D'emploi page 5

4. The time lapse for the device to automatically revert to
transmit function is set to 4 minutes by default. To modify
the default setting, press on the marking button and then
▲
scroll through different options using the
buttons (0 = deactivate the automatic revert-to-trans-
mit function / 2 min / 4 min / 8 min) and then make your
choice by pressing on the marking button.
▲
5. Press the button for the second setting: the distance
when you can mark a victim.
6. The marking distance is set at 3 meters by default. To
modify the default setting, press on the marking button
and then scroll through different options using the
▼
buttons (3 meters away / 5 meters away) and then
make your choice by pressing on the marking button.
▲
7. Press the button for the third setting: activating the
GROUP CHECK function (see paragraph 3.1. GROUP AND
FREQUENCY CHECK).
8. The GROUP CHECK function is activated by default. To
modify the default setting, press on the marking button
and then scroll through different options using the
▼
buttons (1 = GROUP CHECK on / 0 = GROUP CHECK
off) and then make your choice by pressing on the mark-
ing button.
▲
9. Press the button for the fourth setting: turning on
the active interference management function.
8
10. The active interference management function is
turned on by default. To modify the default setting, press
on the marking button and then scroll through different
▼ ▲ ▼
and options using the and buttons (1 = active interfer-
ence management on / 0 = active interference manage-
ment off) and then make your choice by pressing on the
marking button.
▲
11. Press the button for the fifth setting: activating the
SCROLLING function.
12. The SCROLLING function is deactivated by default. To
modify the default setting, press on the marking button
▲
and and then scroll through different options using the
▼
buttons (1 = SCROLLING mode on / 0 = SCROLLING
mode off) and then make your choice by pressing on the
marking button.
▲
13. Press the button to access the end of the menu
("END" blinks on screen).
14. Press the marking button to save your changes and
exit the menu.
▲
and
AUTO-REVERT
MARKING DISTANCE
▲
and
GROUP CHECK
INTERFERENCE MANAGEMENT
SCROLLING FUNCTION
EN
SAVE
9