Publicité
48
11.4 PRODUCT COMPARTMENTS
It may be necessary to modify the dimensions of the compartments to accommodate different types of product.
The number of compartments can be changed by removing or adding separators.
The possible number of spaces per disc are as follows: 4, 6, 8, 12, 16, 24, 48.
Remove the separators using an 8 mm socket wrench for tie rods "A" and, where present, unscrew the
E
screws "C" using a cross-head screwdriver. Pay close attention to the nuts "B" on lower side of the disc.
N
G
The configuration with 4 compartments requires a special kit. To purchase the kit, contact the area sales
L
manager.
I
S
H
11.5 POSSIBLE PALETTE COMBINATIONS
FAS INTERNATIONAL S.r.l. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
It is important not to remove the separator at the magnet support (∗).
EASY 6000 PRO– Issue 00
Publicité
