Publicité
16
• To switch on the machine, follow the instructions below. Connect the power cable. If no errors are
identified, the machine is ready to use.
• Program the machine (see the "PROGRAMMING" chapter), set the REFRIGERATION PARAMETERS
(see the relevant paragraph) in accordance with the food products loaded into the automatic vending
machine and set the prices.
• If the machine is supplied with a change-giving mechanism, insert the corresponding coins in the change-
E
giving tubes.
N
• Load the machine with products (see the "Loading the products" section).
G
L
I
S
6.4
WARNING FOR INSTALLATION
H
The machine is sold without a payment system. Therefore any damage to the machine or harm to people
or property due to the incorrect installation of the payment system will be the exclusive responsibility of those
who made the installation.
6.5
CONNECTING THE PAYMENT SYSTEM
The coin mechanism must be connected and disconnected
with the machine switched off.
The connectors required to connect the coin mechanism are
located next to the main board. The vending machine is set up for
payment systems with EXECUTIVE, MDB and BDV protocols.
•
Fasten the coin mechanism on the support between the two
pins.
•
Connect the coin mechanism connectors to the machine.
•
Adjust the coin chute on the coin mechanism opening
•
Adjust the coin return button leverage
If the machine is disassembled in order to be definitively demolished, it is obligatory to follow the rules in
force regarding the protection of the environment. All ferrous, plastic or similar materials should be taken to
the authorised depots. Particular attention must be made to:
If you have any queries, you are recommended to contact the relevant local refuse disposal authorities.
FAS INTERNATIONAL S.r.l. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
7
WARNING FOR SCRAPPING THE MACHINE
The gases in the refrigeration unit (of any type - refer to the identification plate) must be
collected with suitable equipment by specialised firms
The insulation materials must be recovered by specialised firms.
EASY 6000 PRO– Issue 00
Publicité
