Publicité
EASY 6000 PRO– Issue 00
MDB
Maximum cash credit: it is possible to set the max credit accepted by the coin mechanism by either
key/card or cash is set, and if this amount is exceeded acceptance of further coins or banknotes is blocked
Maximum cashless credit: it is possible to set the maximum credit accepted by the coin mechanism for
key/card purchases
Maximum change: the maximum quantity of coins that can be returned; default value 1000, max value
9000.
Overpay hold: ticking this box enables the option to maintain overpay at the user's disposal for an indefinite
period of time
Purchase obligation before return: when this box is ticked, the customer is obliged to complete the
purchase before receiving change. This is to prevent the coin mechanism being used as a coin-changer. If
the purchase fails to happen, the change will be given out.
Minimum level of tubes: this is the number of coins for each coin box mechanism which must remain in
each tube in order to guarantee the correct function of the coin delivery system (consult the manual of the
coin box mechanism for instructions on setting the correct value of this parameter). If a different value is
associated to each tube, the maximum value set must be between those indicated. The setting of this
parameter is fundamental for ensuring the correct coin management by the vending machine.
N.B. The tube inventory, icon
the value set at Minimum tube level. To empty the tubes completely, use the coin box mechanism delivery
buttons.
Banknote reader enabled in exact amount condition: ticking this box under exact amount conditions
inhibits the banknote reader
Coin counter update: select whether to use the counters corresponding to the content of the coin
mechanism change-giving tube or use only the counters inside the machine. When the box is ticked, at each
power-up the counters inside the machine which correspond to the content of the change-giving tubes are
updated with the values transmitted by the coin mechanism.
Inhibit cashless credit display prevent or enable display of credit from the MDB cashless device (key or
card reader). When the box is ticked, the credit for the cashless device is not displayed
Level of coins for exact amount: this command is for setting (for each change-giving tube) the
number of coins below which the machine can be considered to be in a condition of 'no coins available for
change'. The set value must always be higher than the minimum coin level in the tubes (example: if the
Minimum level of tubes is set at 5, the values set in this command must have a minimum value of 6). The
tubes that are not included in this condition must be set at "0".
When the contents of any one of the tubes included in the condition drops below the corresponding set
value, the machine displays the warning that there are no coins available for change.
Enable coins: enable/disable acceptance of particular coins by the coin mechanism.
Enable notes: enable/disable acceptance of particular banknotes by the reader
Enable exact sun coins: this command is used to enable/disable the acceptance of special coins
in terms of rest small when the display shows the message "insert only exact amount".
FAS INTERNATIONAL S.r.l. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
located in Tube filling, stops when the contents of each tube reaches
25
E
N
G
L
I
S
H
Publicité
