Publicité
36
8.3.1
INTERFACE: Identifies an interface in terms of graphics (colours, layout, button style, etc.), operation
E
(category/selections, alphanumeric keypad, icon selection, sequence of screens to reach product selection).
N
G
L
After setting the correct interface code in the ID parameters
I
interface type.
S
The update can be performed remotely (if the tablet is connected to the internet) or locally, in which case the
H
interface file must be pre-loaded onto the tablet using a USB pen drive.
Remote upgrade is completely automatic: the tablet connects to the specific server, downloads and installs
the file and then runs the interface.
The interface file is a compressed file (.zip extension) the name of which is formed from any alphanumeric
sequence of up to 20 characters (e.g. INTERFACCIA00000003.zip). To load this file up to the tablet after
copying it to a USB pen drive, proceed as follows:
Insert the key into one of the USB ports highlighted in the photo
Select the "copy from USB to local" icon
icon.
The interface will be installed and run automatically.
FAS INTERNATIONAL S.r.l. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
UPDATE INTERFACE TYPE
, use the
to download the file to the tablet; then select the "from local"
EASY 6000 PRO– Issue 00
icon to update the
Publicité
