Publicité
English
30
Lubricating the brew group
To ensure high quality performances of the machine, a lubrication of the brew
group is always necessary. Refer to the following table for the frequency of
lubrication.
Frequency of use
Low
Regular
High
1
Turn off the appliance and disconnect the power cord.
2
Remove the brew group and rinse it using lukewarm water (see the "Cleaning
the brew group under running water" section).
3
Apply a thin layer of the lubricant supplied around the insertion pin on the lower
part of the brew group.
4
Apply a thin layer of lubricant to the guides, on both sides (see figure).
5
Reinsert the brew group (see the "Reinserting the brew group" section).
Note: you can use the lubricant tube many times.
Number of beverages prepared
daily
1-5
6-10
>10
Lubrication
frequency
Every 4 months
Every 2 months
Every month
Publicité
