Publicité
2
Make sure that the yellow locking hook of the brew group is in the right
position.
To position the hook correctly, push it upwards to the highest possible position.
If the hook is still in the lower position, it means that it is not positioned correctly.
3
Reinsert the coffee residues drawer.
4
Reinsert the brew group into the machine along the side guides until it locks in
the right position with a click.
Warning: do not press the PUSH lever.
5
Close the service door.
Cleaning the brew group with cleaning tablets for the
removal of oily coffee residues
Warning: only use Gaggia cleaning tablets to remove any oily coffee residues.
1
Place a container under the coffee dispensing spout.
2
Press the CLEAN/SET
the display.
3
Select " CLEANING THE BREW GROUP " and press the "
CLEAN
BREW GROUP
START/STOP
QUICK MILK CLEAN
DEEPMILK CLEAN
4
Follow the instructions shown on the display to clean the brew group correctly.
DESCALING
5
The procedure will take approximately 5 minutes. START/STOP
used to pause and resume the procedure.
button and select the " CLEAN " button shown on
clean/setting
to start the cleaning procedure.
START/STOP
English
29
" button, then press
can be
START/STOP
Publicité
