Publicité
Send a sound warning to your dog when it is doing something inappropriate.
Catch the attention of your dog...
Teach it that this signal means "To me", "Come" commands, wherever your dog is (the sound
signal replaces your dog-whistle).
The sound signal forgoing the pulse is very efficient; Your dog will soon create a link between its
incorrect behaviour, the sound warning, and its unpleasant feeling.
It is very important to always use the sound signal in the same way so as to prevent your
dog from being confused.
Buttons
to
If your dog does not obey your command followed by the sound pulse, you can send it a
stimulation impulse (at a suitable level) to distract it from its activity and draw its attention to you.
The purpose of this stimulation impulse is not to hurt your dog, but this is very annoying for it and
so the dog will soon create a link between your command, sound signal, and its unpleasant
feeling. A minimum of these stimulation pulse will be necessary after some time as your dog
connects them very well with disobedience of your command and then it will do for you to send
a command and accompany it with a sound signal if necessary.
Long pulse (hold the button pressed down for more than 3 seconds)
It is the first step of the training.
It should be used for training at the place your dog knows well (at the beginning).
As this pulse is a longer one, use a lower intensity and use the impulse length rather than
intensity so that your dog can have some time to understand it.
Short pulse (hold the button pressed down for 1 second at the most)
Use this function to correct the behaviour of your dog.
Short pulses are usually used at a later stage of the training after the dog has already been
trained with long impulses.
Here, higher pulses are used compared to training with permanent impulses.
39
Publicité
