DeWalt DWE550 Traduction De La Notice D'instructions Originale page 24

EngLIsh
165 mm CIRCULAR SAW, DWE550
184 mm CIRCULAR SAW, DWE560
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Power input
No-load speed
Blade diameter
Maximum depth of cut at
90°
45°
Blade bore
Bevel angle adjustment
Weight
Noise values and/or vibration values (triax vector sum) according to EN62841:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Cutting wood
Vibration emission value a
h,W
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or
poorly maintained, the vibration and/or noise emission may differ.
This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
24
WALT one of the
e
DWE550
V 230
AC
V 230/115
AC
1
W 1200
min 5500
-1
mm 165
mm 55
mm 35
mm 20
48˚
kg 3.60
dB(A) 85
dB(A) 96
dB(A) 3
= m/s <2.5
2
m/s 2 1.5
EC-Declaration of Conformity
Machinery Directive
Circular Saw
DWE560
DWE550, DWE560
230
D WALT declares that these products described under
e
230/115 Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015+A11:2022, EN62841-2-5:2014.
1
These products also comply with Directive 2014/30/EU and
1350
2011/65/EU. For more information, please contact D
5500
the following address or refer to the back of the manual.
184 The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
65
42
16
Markus Rompel
48˚
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
3.66
D-65510, Idstein, Germany
21.11.2024
WARNING: To reduce the risk of injury, read the
85
instruction manual.
96
Definitions: Safety Guidelines
3
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous situation
<2.5
which, if not avoided, will result in death or serious injury.
1.5

WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a ) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
FOR FUTURE REFERENCE
WALT at
e
WALT.
e