Publicité
English
ing electric power tools. The actual sound and
vibration levels may vary from the values indica‐
ted, depending on the type of application. The
sound and vibration levels indicated can be used
for an initial estimate of the sound and vibration
load. The actual sound and vibration stress has
to be estimated. The times can be taken into
account in the estimate when the electric power
tool is switched off and also when it is switched
on but running without any load.
22 Bar and Chain Combinations
22.1
STIHL MSA 220.1 T, MSA 220.1 TC Chainsaw
Combinations not listed (or other combinations that are not consistent with chainsaw standards) inc‐
rease the risk of injury through kickback.
Pitch
Drive link
gauge/
groove
width
3/8" P
1.1 mm
3/8" P
1.3 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
1)
If this guide bar is used, the chainsaw must be used only with a STIHL AP battery inserted directly in
the chainsaw or with a 2-in-1 AP webbing sling adapter.
2)
If this guide bar is used, the chainsaw may be used only with a STIHL AP battery inserted directly in
the chainsaw.
23 Spare Parts and Accesso‐
ries
23.1
Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
54
Length
Guide bar
30 cm
1)
35 cm
Light 04
2)
40 cm
30 cm
Light 04
1)
35 cm
Light P04
2)
40 cm
22 Bar and Chain Combinations
21.8
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Number of
Number of
teeth, spro‐
drive links
cket nose
44
50
9
55
44
50
9
55
24 Disposal
24.1
Disposing of Chainsaw and
Battery
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
Saw chain
61 PMM3 (Type
3610)
61 PS3 Pro (3699)
63 PM3 (3636)
63 PS3 (3616)
0458-007-9602-A
Publicité
