Télécharger Imprimer la page

Stihl MSA 220.1 T Notice D'emploi page 44

Publicité

English
9.2
Disengaging the chain brake
► Pull the hand guard back towards the handle
with your left hand.
The hand guard engages with an audible click.
If a battery is inserted: The "CHAIN BRAKE"
LED (1) goes out. The chain brake is disen‐
gaged.
10 Removing and Fitting the
Battery
10.1
Inserting the Battery
► Engage the chain brake.
1
2
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages with a click and is
now locked.
10.2
Removing the battery
1
2
1
► Press both locking levers (1).
The battery (2) is now unlocked and can be
removed.
44
10 Removing and Fitting the Battery
11 Switching the Saw On/Off
11.1
Switching on the chainsaw
► Hold the chain saw by the control handle with
your right hand, wrapping your thumb around
the control handle.
► Disengage the chain brake.
1
► Hold the chainsaw by the handlebar with your
left hand, wrapping your thumb around the
handlebar.
► Press the trigger lockout (1) with your hand
and keep it pressed.
► Press the unlock button (2).
► Press the trigger (3) with your index finger and
keep it pressed.
The chainsaw accelerates and the chain starts
moving.
The more you depress the trigger (3), the faster
the saw chain rotates.
The chainsaw can also be switched on by first
pressing the unlock button (2) and within 5 sec‐
onds (while the "STATUS" LED is flashing)
pressing the trigger lockout (1). The trigger (3) is
now unlocked, and the chainsaw is ready for
use.
If the trigger (3) and the trigger lockout (1) are
released after being switched on, the "STATUS"
LED (4) flashes for another 5 seconds. While the
"STATUS" LED (4) is flashing, the chainsaw can
be switched on again without pressing the unlock
button (2).
The power of the tool may vary depending on the
battery used.
11.2
Switching Off the Chainsaw
► Release the trigger and trigger lockout.
Wait until the saw chain comes to a complete
standstill after about 1 second.
► If the saw chain is still moving after approx. 1
second: Engage the chain brake, remove the
battery and consult a STIHL servicing dealer.
Your chainsaw is defective.
2
1
3
0458-007-9602-A
4

Publicité

loading

Ce manuel est également adapté pour:

Msa 220.1 tc