Publicité
attachment of blades or other accessories. Remember: when the gearbox
output shaft rotates, so does the spiderbox assembly.
2.8 Blades
The blades of the trowel are used to finish the concrete as they rotate
around your given surface. This trowel includes 4 combination blades per
rotor. They are equally spaced in a radial pattern and attached to the
vertical rotating shaft by means of the spider assembly.
2.9 Centrifugal Clutch
In the event of a trowel runaway condition (the operator releases the
handle), the centrifugal clutch will stop the engine and bring the trowel to a
complete stop.
2.10 Training
For proper training education, refer to the "TRAINING CHECKLIST"
section located in the back of this manual. This checklist contains an
outline for an experienced operators to provide training to a new operator.
3. Technical Specifications
Trowel
Model
Engine
Number of blades
Disc diameter
Optimum blade Angle
adjustment(°)
Engine
Model
HMR600
CH260
24in
0-15
CH260
- 7 -
4
Publicité
