Publicité
Step5:Fit the handle bars around
Step6:Place the bolt through the
the eye towards the top of the
base of the handles and then
handle bar column.
fasten with a nut on the end.
4.2 Quick start guide
Step:8 Feed the cable through the
Step:7 To attach the throttle cable,
pivot nut and through the swivel
remove the air filter and the cover.
stop, then fasten the screw.
Step:9 Bring the kill switch wire to
Step:10 Fasten the positive (red)
the front of the engine and connect
and negative (black) engine leads
it the the shut off switch.
to the battery.
- 9 -
Publicité
