Télécharger Imprimer la page

VEVOR HMR600 Mode D'emploi page 18

Publicité

7.2.1 To check the engine oil level, place the power trowel on a secure
level ground with the engine stopped.
7.2.2 Remove the filler dipstick from the engine oil filler hole (FIG. 2) and
wipe it clean.
7.2.3 Insert and remove the dipstick without screwing it into the filler neck.
Check the oil level shown on the dipstick.
7.2.4 If the oil level is low (FIG. 3), fill to the edge of the oil filler hole with
the recommended with SAE10W-30 4 stroke oil. Maximum oil capacity is
400 cc.
FIG.2
7.3 Fuel Check
Engine fuels are highly flammable and can be dangerous if mishandled.
DO NOT smoke while refueling. DO NOT attempt to refuel the trowel if the
engine is hot or running.
7.3.1 Remove the gasoline cap that is located on top of the fuel tank.
7.3.2 Visually inspect to see if fuel level is low. If fuel is low, replenish with
89 Octane gasoline.
7.3.3 When refueling, be sure to use a strainer for filtration. DO NOT top-off
the fuel. Wipe up any spilled fuel.
FIG.3
- 17 -

Publicité

loading

Produits Connexes pour VEVOR HMR600