Publicité
becomes the hardest at a certain position, corresponding to the
compression point. Pull the starter grip briskly and smoothly for starting.
FIG.10
9.7 If the engine has started, slowly return the choke lever (FIG. 7) to the
OPEN position. If the engine has not started repeat steps 1 through 6.
9.8 Before the trowel is placed into operation, run the engine for several
minutes. Check for fuel leaks, and noises that would associate with a loose
V-belt cover or component.
9.9 To begin troweling, move the throttle lever (FIG. 11) toward the "FAST"
position.
FIG.11
10. STOPPING THE ENGINE
10.1 Move the throttle lever to the IDLE or SLOW position (FIG. 11) and
run the engine for three minutes at low speed.
10.2 After the engine cools, turn the engine start/stop switch to the "OFF"
- 22 -
Publicité
