Publicité
and thoroughly understood. Depending on the engine manufacturer,
operating steps may vary. See engine manufacturer's operating
manual.
9. STARTING THE ENGINE
9.1 Place the engine fuel valve lever (FIG. 6) to the "ON" position.
9.2 Place the trowel's throttle lever (FIG. 1) to the "IDLE" position.
9.3 Place the choke lever (FIG. 7) in the "CLOSED " position if starting a
cold engine.
9.4 Place the choke lever (FIG. 8) in the "OPEN" position if starting a warm
engine or the temperature is warm.
9.5 Place the engine ON/OFF switch (FIG. 9) in the "ON " position.
9.6 Grasp the starter grip (FIG. 10) and slowly pull it out. The resistance
FIG.6
FIG.8
- 21 -
FIG.7
FIG.9
Publicité
