Publicité
position (FIG. 12).
10.3 Close the fuel shut- off valve (FIG. 13) by moving the fuel valve lever
to the OFF position.
FIG.12
FIG.13
11. OPERATION
The following steps are intended as a basic guide to machine operation,
and are not to be considered a complete guide to concrete finishing. Read
the "Training" section of this manual for more information.
11.1 Maneuvering the Trowel
11.1.1 Get into the operator's position behind the handle. With a secure
foothold and a rm grasp on the handles slowly increase the engine speed
until the desired blade speed is obtained.
11.1.2 To maneuver the trowel, gently lift up on or press down on the main
trowel handle.
To move the machine to the operator's left, lift up on the handle, to move
the machine to the right, push down on the handle.
11.1.3 Adjust the blade pitch on the Standard handle, by turn the Pitch
Adjust Wheel clockwise or counter- clockwise.
• To move the trowel to the operator's left, Lift up on the handle, to
move the trowel to the right push down on the handle.
• Remember! that if you let goof the trowel, just step away and let the
trowel come to a complete STOP before trying to recover the trowel.
- 23 -
Publicité
