Publicité
12.2 Combo Blades
This trowel was equipped with combination FLOAT/FINISH (FIG. 15)
blades as original equipment. These blades have been designed for
optimum performance in both the floating and finishing operations. These
blades are versatile and should take care of most troweling needs.
12.3 Finish Blades (Optional)
These blades have been specifically designed for finish operations with
this trowel. They will provide a premium surface finishing capability from
your trowel. They should only be used after the concrete has set to the
point where the trowel does not sink into the concrete when placed on it.
12.4 Clip-On Float Blades (Optional)
These blades will clip (FIG.16) on to an existing installed blade, allowing
your finisher to float on "wet" concrete so that the troweling operation can
begin as early as possible. They are easily removable, so that after the
floating operation, when the concrete is sufficiently cured, they can be
removed to expose the finish blades for continued troweling.
FIG.15
FIG.16
- 25 -
Publicité
