Publicité
Machine Set-up Guide
GB
Fitting the Hose Guide
Refit vacuum hose to the
Floor tool when finished.
Fitting the Floor Tool
Note: Raise floor tool before driving to the cleaning area.
The machine will not operate in reverse with the floor tool lowered.
Break-away Floor Tool
The floor tool design incorporates a safety knock-off feature, this allows it to safely
disengage from its mounting should it become caught on an obstruction during
forward movement.
Make sure you do not over tighten the retaining knobs.
Slide floor tool onto bracket.
The U-bend in the hose prevents water spillage when the vacuum is switched off.
Refit vacuum hose to the floor tool when finished.
Tighten retaining knobs to finger tight and
attach hose.
22
Note: DO NOT push the vacuum hose
onto the floor tool with the floor tool in
the raised position.
Lower the floor tool.
Raise the floor tool.
Publicité
