Publicité
der the influence of drugs, alcohol or medi-
cation. A moment of inattention while oper-
ating a tool may result in serious personal
injury or incorrect measurement results.
Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or
Read all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The detector's ability to detect objects is af-
fected by the proximity of other equipment
that produce strong magnetic or electromag-
netic fields, and by moisture, metallic build-
ing materials, foil-laminated insulation mate-
rials, and/or conductive wallpaper.
The detector's ability to detect wood sub-
structures (studs) is also affected by incon-
sistency on the thickness of the surface ma-
terial, such as plaster and lath.
It is possible that there may be metal, wood,
or wiring, or something else, such as plastic
pipes, beneath the scanned surface that is
not detected.
Keep handles dry, clean and free from oil
and grease. Slippery hands cannot safely
control the power tool.
Develop a periodic maintenance schedule
for your tool. When cleaning a tool be care-
ful not to disassemble any portion of the
tool since internal wires may be misplaced
or pinched or safety guard return springs
may be improperly mounted. Certain clean-
ing agents such as gasoline, carbon tetra-
chloride, ammonia, etc. may damage plastic
parts.
Ensure the switch is in the off position be-
fore inserting battery pack. Inserting the
8
1600A034F4 AA Dremel DD12V OSI 20240729.indd 8
1600A034F4 AA Dremel DD12V OSI 20240729.indd 8
Safety Warnings for Laser Levels
Safety Rules for Detector
Additional Safety Warnings
SAVE THESE INSTRUCTIONS
hearing protection used for appropriate con-
ditions will reduce personal injuries.
Use caution when using laser tools in the
vicinity of electrical hazards.
The
should not be relied on
exclusively to locate items below the
scanned surface. Use other information
sources to help locate items before penetrat-
ing the surface. Such additional sources in-
clude construction plans, visible points of
entry of pipes and wiring into walls, such as
in a basement, and standard 16" and 24"
stud spacing practices.
Before penetrating a sur-
face (such as with a drill,
router, saw, or nail), always shut off the
electrical power, gas, and water supplies.
Cutting, drilling, etc... into these items when
operational can result in personal injury.
battery pack into power tools that have the
switch on invites accidents.
Some dust created by power sanding, saw-
ing, grinding, drilling, and other construc-
tion activities contains chemicals known
to cause cancer, birth defects or other re-
productive harm. Some examples of these
chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and ce-
ment and other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
detector
alone
7/29/2024 5:00:16 PM
7/29/2024 5:00:16 PM
Publicité
