Publicité
Model
Permitted battery temperature during charging
Permitted ambient temperature during operation
and storage
Recommended ambient temperature during
charging
Driver/Drill
Voltage rating
No load speed
Bit Holder size
Max drilling capacity mild metal
Max drilling capacity wood
Stud Finder
Maximum interior wall scanning depth for:
• Metal studs
• Wood studs
Laser Level
Relative air humidity, max
Permitted ambient temperature during opera tion:
Permitted ambient temperature during storage:
Permitted ambient temperature during charging:
Permitted air pressure range
Laser class
Laser type
Li-Ion Battery
USB charging cable rating
*
Outside of this range the battery may reach the permitted temperature limits. The
charger may stop charging until the battery temperature returns to the permitted
temperature range.
Note: An AC power adapter for the removable Laser Level 15 is not included. The removable
Laser Level 15 is designed to be charged with a 5V 1A power adapter certified and marked
by an independent safety testing laboratory such as UL, CSA, or Intertek (ETL), such as the
Dremel 510 Power Adapter (not included), and USB-C Charging Cable (included).
Please refer to the battery/charger list, included with your tool.
14
1600A034F4 AA Dremel DD12V OSI 20240729.indd 14
1600A034F4 AA Dremel DD12V OSI 20240729.indd 14
Specifications
Battery Packs / Chargers:
DD12V
+32...+113°F (0...+45°C)
-4...+120°F (-20...+49°C)
+32...+95°F (0...+35°C) *
10.8V /12V
max
0-800 rpm
1/4" (6.5mm)
Hex-shank with power groove
1/2" (12.7 mm)
1/2" (12.7 mm)
5/8"
5/8"
80%
+32°...+104°F (0°...+40°C)
-4°...+120°F (-20°...+49°C)
+32°...+113°F (0°...+45°C)
80-100 kPa
2
<1mW, 635 nm
3.7V - 0.666 Wh
5V
2.0A
7/29/2024 5:00:18 PM
7/29/2024 5:00:18 PM
Publicité
