The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
General Power Tool Safety Warnings . . . . 3
Safety Warnings for Drivers . . . . . . . . . . . 5
Safety Warnings for Drills . . . . . . . . . . . . 6
Safety Warnings for Laser Levels . . . . . . . 6
Safety Rules for Detector . . . . . . . . . . . . . 8
Additional Safety Warnings . . . . . . . . . . . 8
ISED Canada . . . . . . . . . . . . . . . . . . . . . . 9
Intended Use . . . . . . . . . . . . . . . . . . . . . 10
Driver/Drill . . . . . . . . . . . . . . . . . . . . 10
Stud Finder . . . . . . . . . . . . . . . . . . . 10
Laser Level . . . . . . . . . . . . . . . . . . . . 10
Symbols. . . . . . . . . . . . . . . . . . . . . . . . . 11
Getting to Know Your DD12V . . . . . . . . . 12
Specifications . . . . . . . . . . . . . . . . . . . . 14
Assembly . . . . . . . . . . . . . . . . . . . . . . . . 15
Inserting Bits . . . . . . . . . . . . . . . . . . 15
Removing Bits. . . . . . . . . . . . . . . . . . 15
Inserting and Removing the Laser
Level . . . . . . . . . . . . . . . . . . . . . . 15
Charging the Laser Level. . . . . . . . . . 16
Drill/Driver Operation . . . . . . . . . . . . . . 17
Forward/Reversing Lever and
Trigger Lock. . . . . . . . . . . . . . . . . 17
Variable Speed Controlled Trigger
Switch. . . . . . . . . . . . . . . . . . . . . 18
Adjustable Clutch . . . . . . . . . . . . . . . 18
2
1600A034F4 AA Dremel DD12V OSI 20240729.indd 2
1600A034F4 AA Dremel DD12V OSI 20240729.indd 2
Safety Symbols
This is the safety alert symbol. It is used to alert you to po-
tential personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Table of Contents
Drill/Driver Operating Tips . . . . . . . . . . . 21
Stud Finder Operation . . . . . . . . . . . . . . 24
Laser Level Operation . . . . . . . . . . . . . . 28
Brake . . . . . . . . . . . . . . . . . . . . . . . . 19
Built-In Work Light . . . . . . . . . . . . . . 19
Inserting and Removing Battery
Pack . . . . . . . . . . . . . . . . . . . . . . 19
Temperature Overload Protection . . . 20
Protection Against Deep
Discharging . . . . . . . . . . . . . . . . . 20
Battery Charge Indicator . . . . . . . . . . 20
Drilling and Driving. . . . . . . . . . . . . . 21
Wire Brush (Wheels and Cups) . . . . . 23
Operating the Edge-Finding Stud
Finder . . . . . . . . . . . . . . . . . . . . . 24
Recommendations for Proper
Scanning . . . . . . . . . . . . . . . . . . . 24
Switching the Stud Finder On
and Off . . . . . . . . . . . . . . . . . . . . 25
How the Stud Finder Works . . . . . . . 25
Detection Through Textured /
Acoustic Walls and Ceilings. . . . . 25
Stud Finder Detection Process . . . . . 26
Operating the LL01 Laser Level . . . . 28
Fastening the Laser Level with
Mounting Putty . . . . . . . . . . . . . . 28
7/29/2024 5:00:16 PM
7/29/2024 5:00:16 PM