Publicité
DO NOT direct the laser beam
at persons or animals and do
not stare into the laser beam
yourself.
This laser tool produces class
2 laser radiation and complies with 21
CFR 1040.10 and 1040.11 except for con-
formance with IEC 60825-1 Ed. 3., as de-
scribed in Laser Notice No. 56, dated May
8, 2019. This can lead to persons being
blinded.
DO NOT stare directly at the laser beam
or project the laser beam directly into the
eyes of others. Serious eye injury could re-
sult.
ALWAYS make sure that any bystanders in
the vicinity of use are made aware of the
dangers of looking directly into the laser
tool.
Changes or modifications to this equip-
ment not expressly approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
Use of controls or adjust-
ments or performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
DO NOT remove or deface any warning or
caution labels. Removing labels increases
the risk of exposure to laser radiation.
DO NOT place the laser tool in a position
that may cause anyone to stare into the la-
ser beam intentionally or unintentionally.
Serious eye injury could result.
Never aim the beam at a workpiece with
a reflective surface. Bright shiny reflective
sheet steel or similar reflective surfaces
are not recommended for laser use. Reflec-
tive surfaces could direct the beam back to-
wards the operator.
ALWAYS position the laser tool securely.
Damage to the laser tool and/or serious in-
jury to the user could result if the laser tool
fails.
ALWAYS use only the accessories that are
recommended by the manufacturer of your
laser tool. Use of accessories that have
been designed for use with other laser tools
could result in serious injury.
1600A034F4 AA Dremel DD12V OSI 20240729.indd 7
1600A034F4 AA Dremel DD12V OSI 20240729.indd 7
Safety Warnings for Laser Levels
SAVE THESE INSTRUCTIONS
DO NOT use this laser tool for any purpose
other than those outlined in this manual.
This could result in serious injury.
DO NOT leave the laser tool "ON" unat-
tended in any operating mode. ALWAYS
turn the laser tool "OFF" when not in use.
Leaving the laser tool "ON" increases the
risk of someone inadvertently staring into
the laser beam.
DO NOT disassemble the laser tool. There
are no user serviceable parts inside.
DO NOT modify the product in any way.
Modifying the laser tool may result in haz-
ardous laser radiation exposure.
DO NOT use the laser viewing glasses as
safety goggles. The laser viewing glasses
are used for improved visualization of the
laser beam, but they do not protect against
laser radiation.
DO NOT use the laser viewing glasses as
sunglasses or in traffic. The laser viewing
glasses do not afford complete UV protec-
tion and reduce color perception.
DO NOT use any optical tools such as,
but not limited to, telescopes or transits
to view the laser beam. Serious eye injury
could result.
If spirit level leaks, soak up with appro-
priate absorbent material and dispose of
safely. Spirit levels contain flammable liq-
uid that may cause respiratory tract, eye and
skin irritation.
1. Work area safety
Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
DO NOT operate the laser tool around chil-
dren or allow children to operate the laser
tool. Serious eye injury could result.
2. Personal safety
If laser radiation strikes your eye, you must
deliberately close your eyes and immedi-
ately turn your head away from the beam.
Do not make any modifications to the laser
equipment.
Stay alert, watch what you are doing and
use common sense when operating a tool.
Do not use a tool while you are tired or un-
7
7/29/2024 5:00:16 PM
7/29/2024 5:00:16 PM
Publicité
