SMA Solar Technology AG
Figure 8:
Ensure adequate air flow
Figure 9:
Mount on non-flammable surface
Figure 10: Mount upright on vertical surface A backward
tilt of ten degrees is allowed.
Figure 11: Avoid dust and ammonia gases
INFORMATION
When selecting the installation site, ensure that
the product and warning messages on the
inverter are visible at all times. For details, refer
to Section 9, page 45.
INFORMATION
For information about the operating
temperature range, see Section 9.3, page 47.
INFORMATION
The safety clearances to other objects must be
maintained to ensure sufficient air circulation
(see (see Section 5.3, page 24)).
Installation Guide
SHP75-10-STP60-10-IA-xx-20
5 Installation
23