Pedelec ED-1.2 Manuel De L'utilisateur page 46

3. Motor
3.1 The motor does not run, but the operating
elements and the battery function
Cause:
The motor cable has
no contact
Other cable /
contact fault
Pedal sensor
is defective
Electronic circuit
is defective
4. Pedal sensor
4.1 The motor does not work, but the operating
elements and the battery function
Cause:
Pedal sensor is defective > Contact dealer
5. Charging device
Refer to Chapter "Charging the drive battery"
or Item 2.2 of this list
46
Remedy:
> Check plug, it is not
inserted properly
> Contact dealer
> Contact dealer
> Contact dealer
Remedy: