Publicité
ENGLISH
5. Once you complete cleaning, perform the
same procedure in reverse order to reinstall
the oven door.
1
Hinge clamp
2
Hinge
Caution: Once you complete cleaning,
perform the same procedure in reverse order
to reinstall the oven door.
Replacing the oven lamp
WARNING: Hot surfaces cause burns!
Before replacing the oven lamp, make sure
that the product is disconnected from mains
and cooled down in order to avoid the risk of
an electrical shock.
Caution: The oven lamp is a special
electric light bulb that can resist up to 300°C
(573 °F). See Technical specifications. for
details. Oven lamps can be obtained from
Authorised Service Agents or technician with
license.
Caution: Position of lamp might vary
from the figure.
• The oven lights can be illuminated with lamp
button. The lights are switched on when the
door is opened or when the oven is in a
cooking cycle. The oven lights are not
illuminated during self clean. Each light
assembly consist of a removable lens, a light
bulb as well as a light socket housing that is
fixed in place. Light bulb replacement is
considered to be a routine maintenance item.
Caution: In this oven, an incandescent
lamp with a power of less than 40 W, a height
of less than 60 mm, a diameter of less than 30
mm or a halogen lamp with socket type G9, a
power of less than 60 W is used. The lamps are
suitable for operation at temperatures above
300 °C. Oven lamps can be obtained from
Authorised Service Agents or technician with
licence.This product contains a lamp of energy
class G.
Caution: The lamp used in this appliance
is not suitable for household room
illumination. The intended purpose of this
lamp is to assist the user to see food stuffs.
Removing square lamp:
The oven lights can be illuminated with light
key. The lights are switched on when the door
is opened or when the oven is in a cooking
cycle.
The oven lights are not illuminated during self
clean. Each light assembly consist of a
removable lens, a light bulb as well as a light
socket housing that is fixed in place. Light bulb
replacement is considered to be a routine
maintenance item.
1. Turn off power at the main power supply
(your fuse or breaker box).
2. Remove the wire racks as described. you
can refer to the "removing Wire Shelves."
next to the picture on the right.
3. Remove the protective glass cover with a
screwdriver.
37
Publicité
