Publicité
ENGLISH
How to operate the oven
A Symbol of internal temperature
B Display of active clock
C Display of set temperature
D Clear/Off touchpad
E Key Lock touchpad to disable all keys.
F Start/Approve touchpad for cooking
Gas Oven
1. Take all baking trays and the wire grill out
of the oven.
2. Close the oven door.
3. Select the bake function.
4. Set the temperature 350° F.
5. Operate the oven about 30 minutes.
6. Turn off your oven.
Broil
1. Take all baking trays and the wire grill out
of the oven.
2. Select the broil function.
3. Set the broil level to ''HI''.
4. Operate the broil about 30 minutes.
5. Turn off your oven.
WARNING: Before using the oven, the
clock must be set. If the clock is not set, the
oven some functions will not work properly.
Setting the time
1. "Once the range is connected to power, of
he "Settings" key is pressed the time will
begin flashing in the display, along with the
words "clock" and "time."
2. Using the keypad, begin entering the time
of day. For example, let's assume it's 10:26
AM. Enter 1,0,2,6. As soon as you begin
entering the time, only the time indicator
will continue flashing. After making 12 hours
setting, you can perform AM-PM selection
by using keypad number 8 than ''Start''.
If initial time setting is done in the 24
hour time scale (military time). See chart
below for 24/12 time conversion. You can
change the time scale to 12 hour mode after
setting the time.
24 Hour
12 Hour
00:00
12:00 AM
01:00
01:00 AM
02:00
02:00 AM
03:00
03:00 AM
04:00
04:00 AM
05:00
05:00 AM
06:00
06:00 AM
07:00
07:00 AM
08:00
08:00 AM
09:00
09:00 AM
10:00
10:00 AM
11:00
11:00 AM
3. Once you've entered the correct time,
confirm the time by touching the
'' Start '' key on the touch pad, or wait
approximately 10 seconds.
Setting (12HR/24HR) clock mode
1. Press the Settings key until "12 / 24" blinks
in the display.
2. "Once "12/24" begins to flash in the
display, use the numeric touchpad and
press 1 (for 12 hr) or 2 (for 24) time scale.
3. Confirm the selection by pressing '' Start
'' on the touchpad or wait approximately 10
seconds.
IMPORTANT: If 12hr clock is set, PM
indicator is displayed. If 24hr clock is set,
these indicators are not displayed.
Setting Timer Alarm Volume
24
24 Hour
12 Hour
12:00
12:00 PM
13:00
01:00 PM
14:00
02:00 PM
15:00
03:00 PM
16:00
04:00 PM
17:00
05:00 PM
18:00
06:00 PM
19:00
07:00 PM
20:00
08:00 PM
21:00
09:00 PM
22:00
10:00 PM
23:00
11:00 PM
Publicité
