Safety instructions
DANGER! ELECTRIC SHOCK!
Ensure that the appliance, the power cable and the power
►
plug are never immersed in water or other liquids.
Use the appliance only in dry rooms; never use it outdoors
►
or in damp environments.
Ensure that the power cable never becomes wet or damp
►
during operation. Route the power cable in such a way that
it cannot become trapped or damaged in any way.
To avoid potential risks, if the appliance power cable is dam-
►
aged, it must be replaced by the manufacturer, its customer
service or by a qualified technician.
Always remove the plug from the power socket after use.
►
Switching off the appliance is not sufficient because the
appliance receives power as long as the power plug is con-
nected to the socket.
Check to ensure that the appliance is in a serviceable con-
►
dition before use. The appliance may not be used if it shows
signs of damage, especially to the motor block or the blender
attachment.
Remove the plug from the socket immediately if you notice
►
unexpected smells or noises coming from the appliance
while it is in use or if there is an evident malfunction.
WARNING! RISK OF INJURY!
NEVER insert your hand or fingers into the blender, especially
►
when it is in use. The cutting blades are extremely sharp!
DO NOT remove the lid when the appliance is in operation.
►
To ensure you can react immediately in the event of danger,
►
never leave the appliance running unattended.
■
4
│
GB │ IE
SSTMC 600 A1