Publicité
Cleaning the motor block
1) Clean the surfaces with a damp cloth. If necessary, apply a mild washing-up
liquid to the cloth. Afterwards, wipe off with a cloth moistened only with
water to ensure that no detergent remains on the appliance. Then dry the
surfaces thoroughly.
2) When cleaning, always check that the contact switch in the fitting for the
blender 3 is not blocked by soiling residues. If you cannot dislodge any
blockages with the corner of a piece of paper, make contact with Customer
Services. Do not use any hard objects, these could damage the contact
switch.
Storage
1) If you do not intend to use the blender for an extended period, clean it
thoroughly (see chapter "Cleaning").
2) Wrap the power cable around the cable retainer 7 on the base of the
motor block 6.
3) Store the blender in a cool and dry location.
Disposal
Disposal of the appliance
The disposal is free of charge for the user. Protect the
environment and dispose of this appliance properly.
If your old appliance has stored any personal data, you are responsible for
deleting it yourself before returning it.
SSTMC 600 A1
The adjacent symbol of a crossed-out dustbin means that this
appliance is subject to Directive 2012/19/EU. This directive states
that this appliance may not be disposed of in the normal household
waste at the end of its useful life, but must be taken to specially
set-up collection locations, recycling depots or disposal companies.
Your local community or municipal authorities can provide
information on how to dispose of the worn-out product.
The product and its packaging are
recyclable. They are subject to an
extended manufacturer responsibility
and will be collected separately.
GB │ IE
│
15
■
Publicité
