Télécharger Imprimer la page

Cisco LINKSYS WRT120N Mode D'emploi page 31

Masquer les pouces Voir aussi pour LINKSYS WRT120N:

Publicité

Chapter 3
DHCP Clients Table
DHCP Client Table
The DHCP Client Table lists computers and other
devices that have been assigned IP addresses by the
Router. The list can be sorted by IP Address, MAC
Address, Interface, and Client Name. To remove a
DHCP client, click Delete. To update the on-screen
information, click Refresh. To exit this screen and
return to the Local Network screen, click Close.
Status > Wireless Network
The Wireless Network screen displays information about
your wireless network.
Status > Wireless
Wireless Network
MAC Address
The MAC address of the Router's local,
wireless interface is displayed.
Mode
The wireless mode used by the network is
displayed.
Network Name (SSID)
The name of the wireless network,
which is also called the SSID, is displayed.
Channel Width
The Channel Width setting (selected on
the Wireless > Basic Wireless Settings screen) is displayed.
Wide Channel
The Wide Channel setting (selected on
the Wireless > Basic Wireless Settings screen) is displayed.
Standard Channel
The Standard Channel setting
(selected on the Wireless > Basic Wireless Settings screen)
is displayed.
Wireless-N Home Router
Advanced Configuration
Security
The wireless security method used by the Router
is displayed.
SSID Broadcast
The status of the SSID Broadcast feature
is displayed.
27

Publicité

loading