Télécharger Imprimer la page

Cisco LINKSYS WRT120N Mode D'emploi page 17

Masquer les pouces Voir aussi pour LINKSYS WRT120N:

Publicité

Chapter 3
WPA Enterprise
This option features WPA used with a RADIUS server. (This
should only be used when a RADIUS server is connected
to the Router.)
Security Mode > WPA Enterprise
RADIUS Server
Enter the IP address of the server.
RADIUS Port
Enter the port number of the server. The
default is 1812.
Shared Secret
Enter the key shared between the Router
and the server.
Key Renewal
Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default is 3600 seconds.
WPA2 Enterprise
This option features WPA2 used with a RADIUS server. (This
should only be used when a RADIUS server is connected
to the Router.)
Security Mode > WPA2 Enterprise
Encryption
WPA2 supports two encryption methods,
TKIP and AES, with dynamic encryption keys. Select the
type of algorithm, AES or TKIP or AES. The default is TKIP
or AES.
RADIUS Server
Enter the IP address of the server.
RADIUS Port
Enter the port number of the server. The
default is 1812.
Wireless-N Home Router
Advanced Configuration
Shared Secret
Enter the key shared between the Router
and the server.
Key Renewal
Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default is 3600 seconds.
RADIUS
This option features WEP used with a RADIUS server. (This
should only be used when a RADIUS server is connected
to the Router.)
IMPORTANT:
If you are using WEP, then each
device in your wireless network MUST use the
same WEP encryption method and key, or else
the network will not function properly.
Security Mode > RADIUS
RADIUS Server
Enter the IP address of the server.
RADIUS Port
Enter the port number of the server. The
default is 1812.
Shared Secret
Enter the key shared between the Router
and the server.
Encryption
Select
a
level
40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).
The default is 40/64 bits (10 hex digits).
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1
If you did not enter a Passphrase, enter the WEP
key manually.
TX Key
TX (Transmit) Key 1 is used.
of
WEP
encryption,
13

Publicité

loading