Publicité
Important notice 2:
Should there be repeated false alerts when using the preset transmitter indication,
this may hint at a neighbouring Lisa-Signolux installation causing interference. In this
case, the problem can be solved by individually pairing all transmitter and receiver
units within the setup (see „Pairing and assigning to event icons").
Pairing and assigning to event icons
The Acoustic Universal Transmitter can be displayed with an event icon of your own
choice.
To do this, press and hold the function key of the respective receiver for a few se-
conds. The event icons of the receiver light up one after the other. Release the func-
tion key as soon as the desired icon is lit up.
Now press the function key of the Direct Universal Transmitter.
Wait for approx. 20 seconds and the test the setup by pressing the transmitter's func-
tion key. The receiver should now react, showing the according icon. Up to 8 transmit-
ters can be registered per icon.
Installing the microphone cable
The Acoustic universal transmitter is able to react to acoustic signals (e.g. the ringing
of a telephone or doorbell) due to a connected microphone. It then transmitts a radio
signal to all assigned Lisa-Signolux-receivers within reach.
Use the adhesive ring to stick the microphone housing onto the acoustic output grill
of your doorbell / telephone or intercom system.
To do this, pull off the backing foil from the adhesive ring on the microphone.
Plug the microphone cable into socket #1 on the underside of the Acoustic Universal
Transmitter.
To ensure an ideal functioning of the transmitter, please set the sensitivity control #1
in such a way that the transmitter securely reacts to the according acoustic signal.
Method:
- Set the sensitivity control #1 to the least sensitive (extreme left, turn counter-clockwise).
- Trigger the sound source and gradually adjust the sensitivity control (turn clockwise)
until the transmitter reacts to the sound.
If necessary, pair the transmitter manually with the receiver devices for the display of
a corresponding symbol (e.g. telephone symbol for telephone signal, etc.)
Please note: A sensitivity setting, adjusted too high, may result in false alarms.
English 17
Publicité
