E n g l i s h
5.
Attach four point positioning cradle to the lift boom by inserting the split pin.
Ensure pin is secure.
6.
Stand the Stature upright and apply the brakes.
Be careful when lifting the Stature to the upright position, as it is heavy.
Fit hand control plug into the bottom of the control box located on the mast, ensure
correct alignment to the plug socket. Fit power pack to the lift and make sure the
latch holding the pack in place is fully engaged "Click" into place.
DISASSEMBLY
The lift should not be disassembled unless for service, repair or transport if necessary.
If disassembly is necessary, follow the assembly instructions in reverse sequence.
2
1
WARNING
7
294000.10017 Rev. B