Publicité
Problem
Shadow light is not
working or dim.
Blade does not cut
through the wood.
Cause
1. Shadow light lens is covered
in sawdust or wood pitch.
2. Shadow light on/off switch is
not activated.
3. Shadow light on/off switch is
not functioning.
Depth-of-Cut Bolt and Nut is
not adjusted to achieve the
desired depth of cut.
Remedy
1. Clean the shadow light lens with
compressed dry air and/or wipe
with a damp cloth.
2. Turn on the shadow light on/off
switch.
3. Have the switch replaced by an
authorized SKIL service center or
service station.
Loosen the thumbnut and turn the
head of the depth-of-cut bolt to
adjust the depth of cut (See "Depth-
of-cut adjustment").
43
Publicité
