Publicité
ASSEMBLY
Unpacking and checking contents
WARNING
CAUTION
down position .
WARNING
wire connections could cause a fire.
Model MS6306-00 Sliding Miter Saw is shipped complete, in one box.
1. Separate all parts from Loose Parts list below to make sure that all items are accounted
for before discarding any packing material.
2. Loose Parts:
Double-Ended Allen Key
•
Dust Bag
•
Tools needed for assembly and alignment
Double-Ended Allen Key,
6mm Hex, with PH2 Phillips
end (supplied)
Combination square must be true - checking combination square
Should be no gap or overlap
when square is flipped over
in dotted position
WARNING
If any parts are missing, do not plug in the power cord or turn the switch
on until the missing parts are obtained and are installed correctly .
Before moving the saw: Lock the miter-lock lever in the 45° left or 45°
right position . Lock the bevel-lock knob . Lock the head assembly in the
Never carry the tool by the cord or the head-assembly power-switch
handle . Damage to insulation could cause an electric shock. Damage to
Draw light line on board
along this edge
Disconnect the plug from the power source before performing any
assembly, adjustment or repair to avoid possible injury .
Combination Square
(not supplied)
Straight edge of board 3/4" thick.
This edge must be perfectly
straight
10mm Wrench
(not supplied)
17
Publicité
