Analog Stereo; Other Settings; Speaker Level - Rotel RSX-1058 Manuel D'utilisation

RSX-1058 Surround Sound Receiver
NOTE: In addition to the options that follow,
you can select 2-channel, Pro Logic II Cinema
(for 5.1 ch systems), Pro Logic II Music (for 5.1
ch systems), Pro Logic IIx Music (for 6.1/7.1 ch
systems), Pro Logic IIx Cinema (for 7.1 ch sys-
tems), 5-channel stereo, or 7-channel stereo by
pressing one of the surround mode buttons on
the remote (2CH, PLC, PLM, 5CH, 7CH).
• To select any mode for 2-channel
digital recordings. Press the SUR+ but-
ton on the remote, then use the +/– but-
tons to step through the optional modes
until the desired mode is displayed.
• To select STEREO mode for 2-chan-
nel digital recordings. Press the 2CH
button on the front panel or remote.
• To select Dolby multichannel modes
for 2-channel digital recordings. You
can also step through the Dolby options
(Pro Logic II, Pro Logic IIx, or 3-Stereo)
by repeatedly pressing the DOLBY PLIIx
Mode button on the front panel. You can
select Pro Logic or Pro Logic IIx Cinema
or Music modes by pressing the PLC or
PLM buttons on the remote.
To change the Cinema or Music option in
Pro Logic II mode, press the SUR+ button
on the remote twice while in Pro Logic II
or Pro Logic IIx modes. Then, press the
+/– buttons to select the option.
• To select DTS Neo:6 mode for 2-
channel digital recordings. You can
also step through the DTS options (Neo:6
Cinema or Neo:6 Music) by repeatedly
pressing the DTS Neo:6 button on the
front panel.
To change the Cinema or Music option in
Neo:6 mode, press the SUR+ button on
the remote twice while in Neo:6 mode.
Then, press the +/– buttons to select the
option.
• To select DSP multichannel modes
for 2-channel digital recordings.
You can also step through the DSP options
(MUSIC 1-4, 5CH, 7CH) by repeatedly
pressing the DSP button on the front panel.
Directly select 5CH mode by pressing the
5CH button on the remote. Directly select
7CH mode by pressing the 7CH button
on the remote.

Analog Stereo

This type of recording includes any conven-
tional stereo signal from the RSX-1058's ana-
log inputs, including analog audio from CD
players, FM tuners, VCRs, tape decks, etc.
Analog stereo inputs require a choice about
how the signal is routed through the RSX-1058.
One option is the analog bypass mode. In
this mode, the stereo signal is routed directly
to the volume control and the outputs. It is
pure 2-channel stereo, bypassing all of the
digital circuitry. None of the bass manage-
ment features, speaker level settings, contour
settings, or delay settings are active. There
is no subwoofer output. A full-range signal
is sent directly to two speakers.
The other option converts the analog inputs
to digital signals, passing them through the
digital processors in the RSX-1058. This option
allows all of the features to be active includ-
ing bass management settings, crossovers,
subwoofer outputs, contour settings, etc. In
this mode, you can select several surround
modes including 2-CH Stereo, Dolby 3-Ste-
reo, 5-CH Stereo, 7-CH Stereo modes. You
can also use Dolby Pro Logic II or Pro Logic
IIx surround, DTS Neo:6 surround, or one of
the MUSIC 1-4 DSP modes.
NOTE: In addition to the options that follow,
you can select Pro Logic II Cinema, Pro Logic II
Music, Pro Logic IIx Cinema, Pro Logic IIx Mu-
sic, 5-channel stereo, or 7-channel stereo by
pressing one of the surround mode buttons on
the remote (PLC, PLM, 5CH, 7CH).
• To select Stereo or Analog bypass
mode for 2-channel analog re-
cordings. Press the 2CH button on the
remote to toggle between Stereo (with
digital processing) or Analog Bypass (no
digital processing) modes.
• To select any mode for 2-channel
analog recordings. Press the SUR+
button on the remote, then use the +/– but-
tons to step through the optional modes
until the desired mode is displayed.
• To select Dolby multichannel modes
for 2-channel analog recordings.
You can also step through the Dolby op-
tions (Pro Logic II, Pro Logic IIx, or 3-Ste-
reo) by repeatedly pressing the DOLBY
PLIIx/3ST button on the front panel. You
32
can select Pro Logic or Pro Logic IIx Cin-
ema or Music modes by pressing the PLC
or PLM buttons on the remote.
To change the Cinema or Music option in
Pro Logic II mode, press the SUR+ button
on the remote twice while in Pro Logic II
or Pro Logic IIx modes. Then, press the
+/– buttons to select the option.
• To select DTS Neo:6 modes for 2-
channel analog recordings. You can
also step through the DTS options (Neo:6
Cinema or Neo:6 Music) by repeatedly
pressing the DTS Neo:6 button on the
front panel.
To change the Cinema or Music option in
Neo:6 mode, press the SUR+ button on
the remote twice while in Neo:6 mode.
Then, press the +/– buttons to select the
option.
• To select DSP multichannel modes
for 2-channel analog recordings.
You can also step through the DSP options
(DSP 1-4, 5CH, 7CH) by repeatedly press-
ing the DSP button on the front panel. Di-
rectly select 5CH mode by pressing the
5CH button on the remote. Directly select
7CH mode by pressing the 7CH button
on the remote.

Other Settings

Speaker Level

The levels of all channels should be calibrated
using the TEST TONE procedure during the
initial setup of the RSX-1058. You can make
a temporary change in the relative volume
of the center, surround, center back, or sub-
woofer channels using buttons on the remote
control or the front-panel controls. These
temporary adjustments only remain in effect
until a different input is selected or until the
RSX-1058 is turned off.
To adjust speaker levels using the
remote:
1. Press a selection button on the remote to
select a channel (or pair of channels) for
adjustment. Press the C button to adjust the
CENTER channel. Press the S button to ad-
just the SUBWOOFER channel. Press the
R button to adjust the rear SURROUND or
CENTER BACK channels (each press of the
R button toggles between the SURROUND