Assembling The Device - Cleanmaxx EC813E-1250 Mode D'emploi

Floor nozzle (similar to the one shown)
Crevice nozzle
Spray fl oor nozzle

Assembling the Device

CAUTION!
■ Danger of suffocation! Keep children and animals away from the packaging material.
■ Make sure that the device is not connected to the mains power before you attach or
detach any accessories.
You will require a cross-head screwdriver for assembly.
• Unpack all parts and check the items supplied for completeness (see the "Items
Supplied and Device Overview" chapter) and transport damage. If you fi nd any dam-
age to the components, do not use them (!); instead, contact our customer service
department.
• Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
Attaching Wheels and Castors
1. Plug the wheels (15) onto the pins on the receptacle for the fresh water reservoir.
Make sure that the wheels fi t securely. Caution! The wheels can no longer be re-
moved once they have been plugged on!
2. Plug the castors (17) into the holder for the castors (16).
3. Turn over the dirty water and dust container (9) so that the bottom points upwards.
09707_DE-EN-FR-NL_A5_V1.indb 21 09707_DE-EN-FR-NL_A5_V1.indb 21
The fl oor nozzle is suitable for both carpets and hard fl oors.
The foot switch allows you to change between carpet and hard fl oor.
For hard fl oors, a brush is extended on the underside of the nozzle.
The crevice nozzle is suitable for upholstery, cleaning the inside of
cars and for all nooks and crannies that cannot be reached with the
other nozzles. Furthermore, the crevice nozzle is also suitable for
sucking up liquids.
The spray fl oor nozzle is suitable for wet cleaning with carpet sham-
poo and for sucking up liquids.
21 EN
04.01.2016 08:28:41 04.01.2016 08:28:41