Avoiding Damage To Materials, Property And The Device - Cleanmaxx PC-P008 Mode D'emploi

EN

Avoiding damage to materials, property and the device

■ Always place the device on a dry, level, fi rm and heat resistant surface.
■ Lay the cable of the mains adapter so that it does not pose a tripping hazard.
■ Make sure that the mains cord does not get pinched, kinked or laid over sharp edges
and does not come into contact with hot surfaces.
■ Maintain adequate distance to heat sources such as stoves or ovens to prevent da-
mage to the device. Do not place any open fl ames, e.g. burning candles, in the direct
vicinity of the device, cord, rechargeable battery and mains adapter.
■ Do not allow the device to fall and do not subject it to strong percussions.
■ Do not pull or carry the device by the cord of the mains adapter.
■ Do not subject the device to extreme temperatures, severe changes in temperature,
moisture, wetness or direct sunlight.
■ Do not use any corrosive or abrasive cleaning agents to clean the device. They
could damage the surface.
■ Only use the device if it has been completely and correctly assembled! The dust bin
and fi lter must be in place. The fi lters may not be damaged!
■ Do not insert anything in the openings / nozzles of the device and make sure that
they are not plugged.
■ Empty the dust bin after every use. The fi lters must also be cleaned regularly to
prevent the motor from being overloaded.
■ Only use the accessories recommended by the manufacturer.
■
16