Troubleshooting; Technical Data; Disposal - Cleanmaxx EC813E-1250 Mode D'emploi

Troubleshooting

If the device stops working properly, fi rst check whether you are able to correct the prob-
lem yourself. Otherwise you should contact the customer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does not
work.
A stain is not removed.
Dust escapes from the
motor fi lter.
The spray function
does not work.

Technical Data

Model:
Article number:
Voltage supply:
Motor power:
Capacity of fresh water reservoir:
Capacity of dirty water container:
Mains cable length
Protection class:

Disposal

The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be
disposed of in the normal domestic waste. Dispose of it at a recycling centre for
used electrical and electronic devices. You can obtain more information from your
local authorities.
09707_DE-EN-FR-NL_A5_V1.indb 27 09707_DE-EN-FR-NL_A5_V1.indb 27
27
Possible cause/solution
• Is the mains plug correctly inserted in the plug socket?
• Is the socket defective? Try another socket.
• Check the fuse of your mains connection.
• The stain is too stubborn or too old. Treat it specifi cally
with a carpet cleaning product.
• Is the dust bag inserted? Never use the device as a dry
vacuum cleaner without a dust bag!
• Is the fresh water reservoir empty (min. fi ll level: 1 litre)?
Top up the water.
• Is the hose not plugged far enough into the fresh water
reservoir? Correct the fi t.
EC813E-1250
Z 09707
220 – 240 V~ 50/60 Hz
1250 W
max. 3 l
max. 12 l
3 m
Customer Service /
Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls subject to a charge.)
All rights reserved.
04.01.2016 08:28:49 04.01.2016 08:28:49
EN