Publicité
CAUTION!
Always wear protective gloves before replacing the brake pads.
• To replace brakes equipped with pad hol-
ders, slide out the worn pad from the holder
(Fig. 11) and insert a new pad.
• To facilitate insertion of the new brake pad,
wet the inside of the brake shoe with alcohol.
Never use lubriants (Fig. 11).
WARNING!
Alcohol is extremely flammable. Use in a well ventilated area. Do not use alcohol
near any fire, flame, spark, heat or other source of combustion.
• Make sure that the distance between the brake pads and the rim is about 1 mm, as
shown in figure 6 and adjust as necessary.
• When replacing brake pads, cables and casings - only use original Campagnolo
spare parts.
WARNING!
When the brakes are first installed on the bicycle, practice using the brakes in a
clear, traffic-free area. It is important to understand how the braking system works,
operates and "feels" before riding in public.
ENGLISH
4 - REPLACING THE BRAKE PADS
11
®
21
Publicité
