Publicité
8
• Clamp the pad-holders by tightening the 5 mm Allen screw or Torx T25 screw (A - Fig.
9) to a torque of 8 Nm (71 in.lbs).
DANGER!
For brakes equipped with pad-holders, always
make sure that the closed part of the pad-holder
(B) faces in the driving direction, as shown in
figure 10.
Incorrect installation of the pad-holder may cause
the pad to slip out of the holder, resulting in an
accident, personal injury or death.
A
8 Nm (71 in.lbs)
9
FRONT
REAR
B
B
10
ENGLISH
20
Publicité
