Publicité
WARNING!
When mounting the brake to the
frame always make sure that at least
6 threads of the brake's centre bolt
are engaged with the internally thre-
aded sleeve (Fig. 4). If fewer threads
are engaged, the centre bolt may
fail during use, resulting in brake
detachment from the frame an acci-
dent, personal injury or death.
• In order to assure full compatibility
with various frame thicknesses, brakes
are available in three versions:
- with 10 mm socket-head nut (stan-
dard)
- with 18 mm socket-head nut (long)
- with 25 mm socket-head nut (extra-
long)
• Secure firmly the brake to the frame
by tightening the nut (A - Fig. 5) with
a torque wrench to 10 Nm (88 in.lbs).
WARNING!
A loose nut can cause the brake
system to malfunction resulting
in an accident, personal injury or
death.
18
4
10 Nm (88 in.lbs)
5
NO!
OK!
A
E
ENGLISH
Publicité
