BRAND accu-jet pro Mode D'emploi page 39

Recharging procedure
1.
Temperature range for recharging:
+10 °C to +35 °C (+50 °F to 95 °F)
2.
When the AC adapter is initially con-
nected, the LED on the instrument lights
continuously.
3.
After 4 hours of charging, the AC adapter
switches to a pulsed, long-term charg-
ing mode (indicated by the LED flashing
every 15 seconds).
Note:
– The charging system is designed to prevent the battery from over-
charging and minimizes the lazy-battery-effect. To maintain maximum
battery capacity, it is best to charge the battery only when the slowly-
flashing or quickly-flashing LED indicates charging is needed.
– The instrument can be used during recharging.
– If the LED does not light up during charging see chapter
'Troubleshooting' (s. page 46).
Recharging the battery
39