Before Initial Use; Mounting The Accessories - Cleanmaxx HS101 Mode D'emploi

Masquer les pouces Voir aussi pour HS101:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before Initial Use

CAUTION!
Danger of suffocation from plastic fi lms and bags! Keep children and animals away
from the packaging material.
Water residues in the water reservoir are attributable to the fact that this device has
been tested and do not constitute a defect.
Unpack the items supplied and check them for completeness (see the "Items Sup-
plied" chapter) and transport damage. If the device, plug, mains cable or acces-
sories do have damage, do not use the device(!), but contact our customer service
department.
Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.

Mounting the Accessories

CAUTION!
Always pull out the mains plug before you remove/change an attachment. Always
pull the plug and never the cable.
Shortly after use, the attachment used may still be very hot. You should therefore
wait for a few minutes until it has completely cooled down before you detach it.
Long Nozzle Attachment
The long nozzle attachment (2) can be used anywhere. It is ideally suited to cleaning
heat-resistant surfaces in the kitchen and bathroom, corners and places that are hard
to reach.
Brush Attachments
17
The long nozzle attachment can have the brush attach-
ment (5) or the curved attachment (4) plugged onto it.
Plug the long nozzle attachment as far as it will go onto
the steam nozzle (13) of the device and screw it on tight.
The brush attachment (5) is used for cleaning all sorts of pos-
sible objects, e.g. ovens, bathroom fi ttings, bathtubs, sinks,
toys.
Plug the brush attachment directly onto the steam noz-
zle (13) of the device or the long nozzle attachment (2).
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Z 05417

Table des Matières