ACteon Sopix 2 Manuel D'utilisation page 7

E N G L I S H
3.6. ELECTROMAGNETIC INTERFERENCE AND ELECTROSTATIC DISCHARGES
Electromagnetic compatibility (CEM) is the ability of electronic device elements to correctly interact in an
electronic environment. Although this digital X ray system was designed according to this compatibility and complies
with the electromagnetic interference thresholds established by the regulatory agency, there is no guarantee about
the interference likely to occur on a particular installation.
If the device generates interference with radio communication services (which can be determined by switching
it off and on), the user is recommended to try to correct this phenomenon by taking whole or part of the
following measures:
• Change the receiving antenna orientation.
• Reposition the product according to the receiver.
• Take away the computer from the receiver.
The Sopix² digital x-ray system is designed and tested to be used in a home environment, class B Group 1,
according to CISPR11 standard.
3.7. ELECTROSTATIC INTERFERENCE
A strong electrostatic discharge may logically disconnect the Sopix² system from the computer USB (Universal
Serial Bus) port.
In most cases, the Sopix² system recovers itself.
Thereafter, it will be judicious to:
• implement the sensor cap before setting the Sopix² system to hold an image acquisition, and/or
• dissipate your static charge by touching, for example, a metallic part of the dental chair before taking a digital
x-ray.
6
²
S o p i x • U s e r m a n u a l