Publicité
especially during
installation.
●Avoid installing this type
of product in areas where
it would be highly
exposed to shocks.
●Do not let children play
with the product.
●Do not stick adhesive film
on the glass surface. In
case of breakage, it
would generate large
pieces that could be
dangerous
Electrical connection
Danger of electric shock!
●Any electrical installation
must be carried out by an
authorised professional.
●All fittings must be
installed by a competent
person in accordance
with local regulations. If
in doubt, consult a
qualified electrician.
●Important! Always switch
off the electricity supply at
the mains during
installation and
www.linarie.com.au
maintenance. We
recommend that the fuse
is withdrawn or circuit
breaker switched off at
the distribution board
whilst work is in progress.
●This product must be
earthed – if no earth feed
wire is available, consult
an electrician.
●Means for disconnection
must be incorporated in
the fixed wiring in
accordance with the
wiring rules. To achieve
this install appropriate
switched fused connection
unit.
●Note! A switched fused
connection unit having a
contact separation of at
least 3mm in all poles
should be connected in
fixed wiring.
●Connect the incoming
positive, neutral and earth
cables to the terminals of
the switched fused
connection unit. Ensure
connections are tight.
●The spur outlet must still
be accessible even when
8
Publicité
