Publicité
Stand-by status: After connected to the power supply, the
display screen displays the system time, the decimal point
symbol flashes, it is the status before entering cooking
function; If exceeds 10 seconds without any operation under
standby mode, the display brightness automatically reduces,
press any key to recover to the original brightness.
Function to be selected status: Long press program button
under standby status, the display screen will show system time,
it is the status when oven in use symbol and decimal point
symbol keep bright.
Working status: After completed setting any one of the
system time, clock, cooking time or cooking end time, the
display screen will show system time, and it is the status when
corresponding working icon keep bright.
Status switching diagram refer to below:
Status switching diagram
1. Timer function mode switching
Long press program button "M" for 3s enter to system time
setting status, without any operation after 5S,system time,
oven in use symbol " " and decimal point symbol " " keep
bright display; you can circularly switch the oven timer
function mode by program button "M".
21
www.linarie.com.au
Publicité
