Publicité
The operation flow and corresponding functional sequence
are as followings:
Timer function mode switching diagram
4. Operation instructions
4.1 Power on
For the first time, the buzzer "beep" for one time to show that
the timer enters into the standby state. The clock shows the
time of the system and starts the timing. Power-on displays as
"0·00", the display screen displays the system time, the
decimal point symbol " " is flashing,1 second 1 time, like Pic
5.You can push" "to choose 3 kinds of ring tone, The default
is the second ring tone. Whenever user wants to adjust the
ring tone again, press " ".
Pic 5 Power-on default clock diagram (standby state)
4.2 Start up and time setting
When the display is flashing, press "
"for 3 seconds to start
up the oven. Then oven in use symbol"
"lights up and
decimal point symbol "
"
twinkles. When decimal point
www.linarie.com.au
22
Publicité
